Volex Labs / Calculations / Imposed load reduction to Eurocode 1.

Imposed load reduction to Eurocode 1.

Enter the loaded area and the number of storeys carried, and Volex Anvil computes the imposed-load reduction factors — αA for large tributary areas and αn for columns and walls supporting several storeys — with the UK National Annex caps, then the reduced characteristic imposed load qk.

Applying the EN 1991-1-1 §6.3.1.2 reductions safely lightens columns, walls and foundations; the factors and the reduced load are shown so the takedown can be checked.

Run this calculation free → See the verification
Free account · 10 calculations/month · no card required · Pro £29/month

What Volex Anvil checks

Validated against the published example

Imposed-load reduction — area and storey factors EC1 §6.3.1.2 Eq (6.1); UK NA 25%-max-reduction cap
QuantityPublishedVolex AnvilError
Area reduction factor αA0.750.750.00%
Storey reduction factor αn (5 storeys)0.820.820.00%
This case is one of 359 published checks the platform passes — the full table, with every source and every error, is public at volexlabs.com/verification.

Frequently asked

Can I combine αA and αn?
The UK National Annex does not permit αA and αn to be applied together; the governing single reduction is used, within the 25% cap.
Which occupancies qualify?
The reductions apply to the qualifying categories of EC1 Table 6.2; storage and plant areas are excluded.
Is it validated?
The area and storey factors are checked against EC1 §6.3.1.2 — within 0.00%.
Free tier?
Yes — 10 calculations a month free; Pro (£29/month) adds unlimited runs and PDF calc sheets.

Related calculations

Column load takedown and load pathSnow loading to EN 1991-1-3, UK zones and altitudeWind loading to EN 1991-1-4, with the UK National Annex

Check it in the code, not in a black box.

Every result carries its clause references. Free tier, results in seconds.

Try Volex Anvil free →