Volex Labs / Forge / Shaft coupling generator — text to CAD.

Shaft coupling generator — text to CAD.

Describe the coupling — the two bore diameters, overall length, set-screw or clamp style — and Volex Forge returns a manufacturable shaft coupling as a STEP for machining or an STL for printing.

Bores are concentric and sized to your shafts, set-screw bosses land on flats, so the coupling grips and runs true without a redraw.

Free to try Parts from £2.99 STEP · STL · DXF FEA-verified

What you get

From a plain-English prompt

Rigid 8-to-10 mm clamp couplingExample — your parameters, your file
a rigid shaft coupling for an 8mm shaft, 30mm long
ParameterValue
TypeRigid sleeve over two shaft ends
Shaft diameter8.0 mm
Sleeve bore8.2 mm — 0.2 mm running clearance
Sleeve outside diameter18.2 mm
Sleeve length30.0 mm
Bodies in the file3 — sleeve and both shafts
ExportSTEP / STL
Every part is checked before you download it — geometry, and where relevant FEA against textbook theory. See the verification report.

Frequently asked

Can I get a split clamp, set screws, or two different bores?
No to all three from this template: it builds a plain sleeve with one bore, and the table lists exactly that. A clamp slit with M3 screws, or a stepped coupling with a different bore at each end, goes through Forge's AI path — describe it and check what comes back.
Can I get a split clamp, set screws, or two different bores?
No to all three from this template: it builds a plain sleeve with one bore, and the table lists exactly that. A clamp slit with M3 screws, or a stepped coupling with a different bore at each end, goes through Forge's AI path — describe it and check what comes back.
Can the two ends have different bores?
Yes — each bore is a separate parameter, so a coupling between an 8 mm motor shaft and a 10 mm lead screw is one prompt away.
Clamp or set screw?
Either. Clamp couplings grip without marking the shaft; set-screw couplings are simpler. Name the one you want.
Will it stay balanced at speed?
The geometry is concentric and symmetric, so it runs true; for high RPM machine it in metal from the STEP.
How much?
Free to try, downloadable parts from £2.99.

More Forge generators

A coupling sized to both your shafts.

Free to try · parts from £2.99 · STEP, STL or DXF · every part verified before download.

Generate it in Forge →