Volex Labs / Forge / Text to DXF file for laser cutting.

Text to DXF file for laser cutting.

Describe a flat part — outline, holes, slots — and Volex Forge returns a clean DXF, scaled 1:1 in millimetres with closed profiles, ready to send to a laser cutter or waterjet.

No open contours, no double lines, no scaling surprises — the profile cuts exactly as drawn.

Generate this part — from £2.99 → How Forge works
Free to try Parts from £2.99 STEP · STL · DXF FEA-verified

What you get

From a plain-English prompt

From prompt to laser-ready DXFExample — your parameters, your file
a 120 x 80mm gasket, 4mm thick outline, 60mm central hole, six 5mm bolt holes on a 100mm PCD
ParameterValue
OutputDXF, 1:1 mm
ProfilesClosed, single-line
FeaturesOutline + holes + slots
ForLaser / waterjet / plasma
Also availableSTEP, STL
PriceFrom £2.99
Every part is checked before you download it — geometry, and where relevant FEA against textbook theory. See the verification report.

Frequently asked

Are the profiles closed?
Yes — every contour is a single closed polyline, so the cutter's software reads it without repair.
Is it scaled correctly?
Yes, 1:1 in millimetres. What you describe is the size that cuts.
Can I have an etch/engrave layer?
Yes — ask for text or an etch and Forge puts it on a separate layer the cutter can treat as engrave.
How much?
Free to try; a downloadable DXF is from £2.99.

More Forge generators

Spur gear generator — text to CADFlange generator — text to CADBracket generator — text to CADAll of Volex Forge

A DXF that cuts exactly as drawn.

Free to try · parts from £2.99 · STEP, STL or DXF · every part verified before download.

Generate it in Forge →