Volex Labs / Forge / Standoff & spacer generator — text to CAD.

Standoff & spacer generator — text to CAD.

Describe the standoff or spacer — length, outer form (hex or round), and the thread or clearance bore — and Volex Forge returns a print-ready STL or a STEP for machining.

Threads and bores are sized to standard fasteners, so an M3 standoff takes an M3 screw without chasing the hole.

Free to try Parts from £2.99 STEP · STL · DXF FEA-verified

What you get

From a plain-English prompt

M3 hex standoff, 15 mmExample — your parameters, your file
an M3 hex standoff, 15mm long, 5.5mm across flats
ParameterValue
FormHex prism with a through bore
Across flats5.5 mm
Across corners6.35 mm
Length15.0 mm
Boreø3.4 mm — M3 clearance, plain, not threaded
ExportSTEP / STL
Every part is checked before you download it — geometry, and where relevant FEA against textbook theory. See the verification report.

Frequently asked

Is the bore threaded?
No — this template cuts a plain clearance bore, ø3.4 mm for an M3, and the table says so. For a real modelled thread see the threaded rod generator, which cuts a true helix. A female–female threaded standoff goes through Forge's AI path.
Is the bore threaded?
No — this template cuts a plain clearance bore, ø3.4 mm for an M3, and the table says so. For a real modelled thread see the threaded rod generator, which cuts a true helix. A female–female threaded standoff goes through Forge's AI path.
Male–female or female–female?
Either — name the end configuration and Forge builds the matching threaded or plain ends.
Will an M3 screw fit?
Yes, threads are cut to the standard M-series pitch and diameter, so standard screws thread straight in.
Hex or round?
Both are supported; hex if you want to grip it with a spanner, round for a cleaner look.
Cost?
Free to try, downloadable parts from £2.99.

More Forge generators

Standoffs your fasteners fit.

Free to try · parts from £2.99 · STEP, STL or DXF · every part verified before download.

Generate it in Forge →